What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 02:30

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
He then describes Rainy Season and Lightning.
The bolt then partially travels down the line to your home.
One
It also is a device that limits the change in current flow.
What were your fantasies when you reached puberty?
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–16 [ OO OLAOYE OYEBODE ]
what exactly is a ‘surge’ protector?
Is TikTok becoming a platform for soft porn?
What does a fuse do?
So, the voltage could go up to 500 volts, and the fuse will not open up.
These devices are installed between the “hot” and “neutral” and protective ground.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
[old diagram got deleted by accident]
This Type of Fiber Could Have Weight Loss Benefits Similar to Ozempic - ScienceAlert
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
These are simplified answers to the original question, and does not change anything I wrote above.
A fuse is a non-resetable over current circuit protector.
Why do I like to eat my own cum?
This is 'the assistant's answer'
This one hit behind the barn.
I post the exact comment here.
Mars’ Mysterious Dark Streaks Are NOT Caused by Water! Here’s the Real Story - The Daily Galaxy
One is “what exactly is in a ‘surge protector’ ? ”
This device then solves the entire problem.
Upvotes:
[image of Common-mode choke]
An AC voltage/ current source, and an ac inductive load.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
NASA withdraws support for conferences - SpaceNews
The third is lightning and “how it gets conducted into a home.”
so, what happens?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
But… the neutral is now “floating” because of the 1 ohm resistance.
This is where this question deviates from being a 'generic' question, and becomes more specific.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Trump Weighs In On Possible Sean 'Diddy' Combs Pardon: 'He Used To Really Like Me' - HuffPost
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
He then describes the function of a fuse.
Corbin Burnes To Undergo Tommy John Surgery - MLB Trade Rumors
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Edit 2024–10.
a photo is worth a thousand words.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–14 [Omar Gharbi Omar Gharbi ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What is lightning?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The other is “what does a “fuse” do?”
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but I think this circuit , shows a few more pieces.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
A circuit breaker is similar, but is resettable.
It seems Mohan does not understand the difference between a comment and an Answer.
the problem then depends on "how fast does the fuse operate?".
He then asserts :
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–10[John johnson John Johnson ]
There are three different concepts here that are getting confused.
There are two important concepts here.
Here is a simplified AC power diagram.
but this device (an Inductor) … impedes the rapid changes in the current.
eight
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At least they know the answer if they wanted it.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
In schematic diagrams this is the symbol for a fuse:
But it can get overloaded, and no longer works.
Because the load is inductive, the current lags the voltage.(by a bit).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
nine
For this case there are devices called Metal oxide varistors (MOV).
Barnstars:
First Sentence:
(Dc diagram shown, AC is similar).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Now when you have a certain ac resistance, then a current flows in a loop.
This is where the MOV conducts again, and dissipated the energy.